Products related to Trim:
-
Trend UNIBASE Universal Trim Router Sub-Base 150mm
We currently have no further description for this item or it does not need any further details. If this product has recently been added we will be working hard to get more information added as soon as possible.
Price: 35.95 € | Shipping*: 4.95 € -
Bont Quad Hybrid Microfibre Black With White Trim Derby Boot
Heat Moldability The Bont Hybrid fiberglass in the boot is made hard by the use of a thermosetting epoxy resin. Resin development is something that we have been doing since 1975. Formulating a resin that is super stiff, yet becomes moldable at low temperatures and has a fast cure time is critical for our unique requirement which is why we are the only skate manufacturer who develops our own resins in-house. Our resin becomes soft at just 60 degreesC (140 degreesF) which is the lowest in the industry. Once you heat the resin, mold the shoe and let it set, it is permanently set without the need to remold. You can also reheat the resin as many times as you like. Light Weight The Bont Hybrid boots are manufactured by hand in a process where we build the boot from the inside out by hand laying the carbon of fiberglass around the last (plastic foot). This method of manufacturing is extremely time consuming compared to the traditional method of quad boot manufacturing which is done by gluing the upper to the pre made base. However, our method results in a much stronger and lighter structure. Memory Foam The Bont Hybrid is made with high density closed cell memory foam. This padding will not deform over time or retain water from sweat or wet surfaces
Price: 159.95 € | Shipping*: 0.00 € -
Trend Bearing Guided Double Trim Router Cutter 18mm 15mm 1/4"
Trimming top and bottom surfaces simultaneously with bearing following the board. Two fluted. Increased productivity. Specifications • Shank Diameter: 1/4 • Dia Metric: 18 • Cut Length Metric: 15 • Overall Length Metric: 65
Price: 82.95 € | Shipping*: 4.95 € -
Trend CRAFTPRO Giuded Pierce and Trim Router Cutter 6.3mm 18mm 8mm
Cuts out apertures in laminate worktops. The nose of the cutter acts as a guide follower. Specifications • Shank Diameter: 8 mm • Dia Metric: 6.3 • Dia Imperial: 1/4 • Cut Length Metric: 18 • Cut Length Imperial: 45/64 • Overall Length Metric: 77
Price: 23.95 € | Shipping*: 4.95 €
-
Can you trim whiskers?
It is not recommended to trim a cat's whiskers as they serve an important sensory function for the cat. Whiskers help cats navigate their surroundings and can provide important information about their environment. Trimming a cat's whiskers can disorient them and make them feel insecure. It is best to leave their whiskers intact to ensure their well-being and comfort.
-
How do you trim ivy?
To trim ivy, start by using sharp pruning shears or hedge trimmers to cut back the overgrown vines. Trim the ivy to the desired length, making sure to cut just above a leaf node to encourage new growth. It's important to regularly trim ivy to prevent it from becoming too dense and to promote healthy growth. Be cautious not to trim too much at once, as this can stress the plant.
-
Should I shave or trim?
Whether you should shave or trim depends on your personal preference and the look you are trying to achieve. Shaving will give you a clean, smooth look, while trimming will help maintain a more natural and rugged appearance. Consider factors such as the texture of your hair, the style you are going for, and how much maintenance you are willing to do before deciding whether to shave or trim. Ultimately, the choice is yours and you should go with what makes you feel most comfortable and confident.
-
When can you trim Thujas?
Thujas, also known as arborvitaes, can be trimmed in the early spring or late summer. It is best to avoid trimming them during the fall months as this can leave them vulnerable to winter damage. Regular trimming can help maintain the shape and size of the tree, but be sure not to trim more than one-third of the total growth in a single trimming session to avoid stressing the tree.
Similar search terms for Trim:
-
Trend Pierce and Trim Two Flute Router Cutter 12.7mm 30mm 1/2"
Trend Professional 1/2in shank bearing guided pierce and trim cutter - 12.7mm diameter for laminate work 12.7mm diameter X 30mm cutting length pierce and trim cutter for flush cutting apertures in worktops cleanly. 1/2in shank cutter perfect for heavy duty trimming work to bring laminate flush on internal apertures for sinks, hobs and other similar applications. Cutter has a piercing tip to drill through the laminate and run against the work to make the cut in one go for fast, efficient and clean cutting. 1/2in shank for use in bigger routers and heavier applications with 'K'mark shank to ensure safe working practices. Specifications • Shank Diameter: 1/2 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 30 • Overall Length Metric: 87
Price: 58.95 € | Shipping*: 4.95 € -
Trend Pierce and Trim Two Flute Router Cutter 6.3mm 18mm 1/4"
Trend Professional 1/4in shank bearing guided pierce and trim cutter - 6.3mm diameter for laminate work 6.3mm diameter X 18mm cutting length pierce and trim cutter for flush cutting laminated apertures cleanly. 1/4in shank and 18mm cutting range; ideal for smaller routers and thinner materials allowing easy control. Cutter has a piercing tip to drill through the laminate and run against the work to make the cut in one go for fast, efficient and clean cutting. 1/4in shank for easy control in smaller routers with 'K'mark shank to ensure safe working practices. Specifications • Shank Diameter: 1/4 • Dia Metric: 6.3 • Dia Imperial: 1/4 • Cut Length Metric: 18 • Overall Length Metric: 65
Price: 29.95 € | Shipping*: 4.95 € -
Trend Caravan Industry Single Flute Spiral Pierce and Trim Cutter 6.35MM 19mm 1/4"
A single fluted high steel cutter for pierce and trimming of aluminium faced panels in the caravan industry. Specifications • Shank Diameter: 1/4 • Dia Metric: 6.3 • Dia Imperial: 1/4 • Cut Length Metric: 19.1 • Overall Length Metric: 76
Price: 43.95 € | Shipping*: 4.95 € -
Trend CRAFTPRO 3 Piece 160mm Panel Trim Circular Saw Blade Set 160mm 48T 20mm
Multi-pack of same diameter sawblades designed for a professional finish in soft wood, hard wood, plywood, soft fibre, plasterboard stone, fibre board, cement bonded board and particle board. Reamed bore to ensure precise fit to spindle. Silverbraze to ensure tip is bonded securely to body. Body hardened and tempered to maintain trueness. Laser etched on reverse to European standard EN847-1/2. The Trend name for traceability and a guarantee of quality. High grade alloy steel plate body precision ground to maintain flatness. Microgranular Tungsten Carbide Tipped to allow cutting of abrasive materials. For plunge saws. Specifications • Tooth Form: TCP • Dia Metric: 160 • Dia Imperial: 6 1/4 • Pack Qty: 3 • Sawbore: 20 • Saw Kerf Metric: 2.2 • Saw Plate Thick Metric: 1.6 • Hook Angle Degrees: 4 • Saw Teeth: 48 Contents: 3 x CSB/PT16048
Price: 82.95 € | Shipping*: 4.95 €
-
When to trim Thuja tips?
It is best to trim Thuja tips in the late spring or early summer, after the new growth has emerged. This timing allows the plant to recover and continue to grow throughout the rest of the growing season. Avoid trimming Thuja tips in the fall or winter, as this can leave the plant vulnerable to winter damage. Additionally, it is important to only trim the tips of the branches and avoid cutting into older wood, as this can harm the plant's overall health.
-
How do I trim waterweed?
To trim waterweed, start by using a pair of sharp scissors or pruning shears to cut the stems of the waterweed at the desired length. It's important to trim the waterweed regularly to prevent it from becoming overgrown and taking over the aquarium or pond. When trimming, be sure to remove any dead or decaying parts of the plant to promote healthy growth. Additionally, it's a good idea to remove any trimmed pieces from the water to prevent them from decomposing and causing water quality issues.
-
How do you trim whiskers?
To trim whiskers, it's important to use small, sharp scissors and to be very gentle. Start by combing the whiskers to separate them and make them easier to trim. Then, carefully trim the whiskers to the desired length, being cautious not to cut too close to the skin. It's important to only trim the very tips of the whiskers to avoid causing any discomfort to the animal.
-
"Does this trim fit now?"
To determine if the trim fits now, you should try it on and assess the fit. Pay attention to how it sits on your body and if it feels comfortable. Check if there are any areas that are too tight or too loose. If the trim fits well and is comfortable to wear, then it likely fits now.
* All prices are inclusive of VAT and, if applicable, plus shipping costs. The offer information is based on the details provided by the respective shop and is updated through automated processes. Real-time updates do not occur, so deviations can occur in individual cases.